EcoProof offer waterproofing solutions for all size projects from a permanent patch repair to our largest project so far of 90,000 sq meters.
Offering the highest performing certified waterproofing solutions, no matter how demanding your project we have a product to meet your needs.
FastCoat is our single component fast curing polyurethane system developed using only PURE POLYURETHANE technology ensuring long life performance & UV resistance. Polyurethanes are known for their exceptional strength and elastic properties, with this in mind FastCoat offers the complete system for waterproofing roofs, balconies, gutter and walkways.
Ideal for flat roofs, suitable for pitched roofs although additional coats maybe required. Suitable for balconies when fully reinforced.
FastCoat comes with a 10 year guarantee and a + 20 year life expectancy with CE certification as standard, conforming to EU guideline for this type of materials, ΕΟΤΑ (European Organization of Technical Approval).
FastCoat, the cost effective rapid application polyurethane waterproofing system from the makers of EcoProof.
FastCoat is backed by BBA certification.
FastCoat Concrete Primer is a 2-component product used to seal concrete prior to the application of the FastCoat Waterproof System. The coverage it offers is 15-20m2 per 5kgs. Fast curing allows for the same day application of waterproofing over concrete, asbestos and fibre cement.
Ensure the surface is fully cleaned and free from loose material, grease and chippings before application. If possible clean the surface with a power washer and allow to fully dry prior to product application. Repair all damages and fill all voids.
The typical cure time of FastCoat Concrete Primer is 4 hours and the application rate is 0.3kg per 1m2.
FastCoat is a single component, wet on wet pure polyurethane waterproofing system. Designed for ease of use, exceptionally elastic and hard wearing with a 25-year life expectancy. Ideal for application over most surfaces, FastCoat is fully bonded and seamless and designed for flat and low-pitch roofs.
This waterproofing product offers coverage of 1ms per 1.5kg when applied wet on wet. It should be applied as 1kg, then reinforcement matting, then a further 0.5kg. High performance and easy to install, this single component waterproofing system comes with a 10-year guarantee and a 25-year life expectancy.
FastCoat PU waterproofing is showerproof in one hour but must be applied over the top of the FastCoat PU Primer.
FastCoat PU Primer is a single component product used to prepare the surface of GRP AND Single Ply prior to the application of the FastCoat Waterproof System. It’s designed for flat & low-pitched roofs, offering coverage of 25m2 per 5kg.
FastCoat PU Primer is fast curing so allows for the same day application of waterproofing. Before applying ensure the surface is cleaned and free from any debris or grease. Repair all damages and fill any voids before applying to a rate of 0.2kg per 1m2.
The average cure time is between 15 minutes and 2 hours dependent on the surface, the temperature and of course, weather conditions. Do not apply this primer when rain is forecasted.
This product comes with a 10-year guarantee when installed to instructions.
FastCoat is a single component, wet on wet pure polyurethane waterproofing system. Designed for ease of use, exceptionally elastic and hard wearing with a 25-year life expectancy. Ideal for application over most surfaces, FastCoat is fully bonded and seamless and designed for flat and low-pitch roofs.
This waterproofing product offers coverage of 1ms per 1.5kg when applied wet on wet. It should be applied as 1kg, then reinforcement matting, then a further 0.5kg. High performance and easy to install, this single component waterproofing system comes with a 10-year guarantee and a 25-year life expectancy.
FastCoat PU waterproofing is showerproof in one hour but must be applied over the top of the FastCoat PU Primer.